Directions for use: holding chamber (mask)
- Remove the cap from the metered-dose inhaler, then shake the inhaler.
- Insert the metered-dose inhaler into the back of the spacer device.
- Place the mask on the face so that it fits securely over the mouth and nose. Check to make sure that there is a good seal.
- Breathe out to empty the air from the lungs.
- At the beginning of a slow breath in, press the metered-dose inhaler to release a dose of the medication.
- Breathe in and out slowly and deeply for 5 to 6 breaths holding the mask on the face. The valve should move with each breath.
- Remove the metered-dose inhaler, then replace the cap on the mouthpiece.
Do not breathe too fast: some devices emit a whistling sound to let you know if you are breathing too quickly.
If you must take more than one inhalation (of the same medication or another medication), wait 1 to 2 minutes between doses.
Clean the device once a week, as recommended by the manufacturer. Replace the spacer after 12 months of use.
If you have problems using the spacer, speak to your pharmacist; he or she will be happy to help you.
[UNIPRIX] © Copyright Vigilance Santé
The patient information leaflets are provided by Vigilance Santé Inc. This content is for information purposes only and does not in any manner whatsoever replace the opinion or advice of your health care professional. Always consult a health care professional before making a decision about your medication or treatment.